Click here for brochure and installation information
The MobilFlex Counter Shutter features an attractive slimmed down components that won’t cramp or crowd your display room. Solid aluminum slats discretely enhance any interior, make Mobilflex Counter Shutters the perfect choice for service counters, ticket windows and kiosks
(Openstyle)
Maximum Security Rods & Links
Mobilflex Roll-Guard features reinforcement tubes with just 7/8″ spacing between the rods! This strong overhead door is suitable for any public building where ventilation and maximum security are required.
All horizontal rods are covered by 7/16″ (11mm) diameter aluminum horizontal spacer tubes leaving 13/16″ (21mm) spacing between tubes. End plates are 3/16″ steel plates to support the ends of the barrel assembly with sealed, self-aligning shaft bearings.
Quote(Openstyle)
Innovative And Economical
Each maximum security Mobilflex Roll-126 rolling grille is reinforced with aluminum-tube rods that provide protection against break-ins without restricting air flow or visibility.
The rolling curtain is constructed of horizontal sections of full width, concealed 5/16” diameter rods. The rods are spaced 2 1/2” high on center by 5/8” x 3 1/8” vertical links spaced at 9” intervals. All horizontal rods are covered by 7/16″ diameter aluminum horizontal spacer tubes with 2 1/16″ spacing between tubes. End plates are 3/16″ steel plates to support the ends of the barrel assembly with sealed, self-aligning shaft bearings. The end plates bolted to the support tubes.
Quote(Openstyle)
High-Resistance Open-Air Closure
The Mobiflex Roll-99 has sturdy aluminum extrusions and continuous metal rods assembled in a checkerboard pattern. This coiling grille is the ideal way to deter smash and grab theft.
The rolling curtain is constructed of 3” x 9″ aluminum slats arranged in a checkerboard pattern. These slats shall be held by 5/16″ diameter horizontal aluminum rods. End plates are 3/16″ steel plates to support the ends of the barrel assembly with sealed, self-aligning shaft bearings. The end plates bolted to the support tubes. The barrel is a steel pipe with a 6 5/8” diameter x 0.188” wall, designed to carry the whole curtain load.
Quote(Opaque)
Privacy & Security
For maximum security and total protection, Mobilflex’s Roll-Shutter offers a nearly hermetic closure. This rolling shutter is ideal for service counters, concession stands, and merchandise warehousing areas.
The rolling curtain is constructed of 3” on center extruded aluminum sections. Each section is framed by continuous, double “C” hinges. Each slat shall be made of a continuous, solid, opaque .050″thick aluminum extrusion. End plates are 3/16″ steel plates to support the ends of the barrel assembly with sealed, self-aligning shaft bearings. The end plates bolted to the support tubes. The barrel is a steel pipe with a 6 5/8” diameter x 0.188” wall, designed to carry the whole curtain load.
Quote(Perforated)
Proven Security, Cutting-Edge Design
Mobilflex Roll-Air features 50% perforated steel slats covered with high resistance powder coat paint that provides excellent visibility, air flow, and security. It’s at home in high-end storefronts and any location with a contemporary architectural vibe.
The rolling curtain is constructed of 3” on center extruded aluminum sections. Each section is framed by continuous, double “C” hinges that hold 20 gauge (.035”) thick perforated metal panels x 2 ½” high x 15 3/4” wide, separated by 2 1/2” high x .050” thick aluminum slats. End plates are 3/16″ steel plates to support the ends of the barrel assembly with sealed, self-aligning shaft bearings. The end plates bolted to the support tubes. The barrel is a steel pipe with a 6 5/8” diameter x 0.188” wall, designed to carry the whole curtain load. The barrel houses a torsion spring counter-balance assembly to support the curtain.
Quote(Polycarbonate)
Security With Sophisticated Style
Mobilflex’s unique design uses transparent polycarbonate inserts. This innovative see-through rolling closure is an excellent solution for locations requiring security and visual appeal, like high-end stores.
The rolling curtain is constructed of 3” on center extruded aluminum sections. Each section framed by continuous double “C” hinge hold clear polycarbonate panels 1/16” thick x 2 ½” high x 15 3/4″ wide, separated by 2 1/2” high x .050” thick aluminum slats. End plates are 3/16″ steel plates to support the ends of the barrel assembly with sealed, self-aligning shaft bearings. The end plates bolted to the support tubes. The barrel is a steel pipe with a 6 5/8” diameter x 0.188” wall, designed to carry the whole curtain load.
A Roll-Flex model with open spaces instead of polycarbonate inserts is also available.
Quote